Locally owned in Loveland · Free equipment evaluations (970) 775-4896

Furnaces

Why Your Furnace Needs to Be Set Up for Altitude in Northern Colorado

By Loren & Joel · November 5, 2026

Most of Northern Colorado sits around 4,700 to 5,200 feet. Estes Park is over 7,500. At those elevations there’s noticeably less oxygen in every cubic foot of air, and that matters to a gas furnace.

What "derating" means

Furnaces are rated at sea level. Manufacturers publish high-altitude instructions that typically reduce the gas input (by adjusting gas pressure or changing orifices) so the fuel and available oxygen stay in balance. Some newer furnaces handle this differently, but every installation still has to follow the manufacturer’s altitude specs.

What goes wrong when it’s skipped

  • Overheating: the heat exchanger runs hotter than designed, tripping high-limit switches and short-cycling.
  • Shorter life: heat exchangers that run hot are more likely to crack over time.
  • Poor combustion: higher carbon monoxide production at the appliance.
  • Nuisance shutdowns: furnaces that cut out on cold nights for no obvious reason.

How we check it

On every repair, evaluation and installation, we measure gas pressure and temperature rise and compare them with the manufacturer’s specs for your elevation. It’s a small step that a surprising number of installs skip, especially in fast-built neighborhoods.

Want to know if yours is set up right? It’s part of our free equipment evaluation. If you’re in the mountains, see our Estes Park page.

Keep reading